# PlexMeetsHomeAssistant Custom Home Assistant card which integrates plex into Home Assistant and makes it possible to launch movies or tv shows on TV with a simple click. Supported are **ALL** Plex clients, some even with enhanced functionality. Kodi with PlexKodiConnect and Google Cast is also supported. Video of the card: [![Youtube video](https://img.youtube.com/vi/88e7lZUFD28/0.jpg)](https://youtu.be/88e7lZUFD28) More images [at the end of the readme](https://github.com/JurajNyiri/PlexMeetsHomeAssistant#images). ## Important notice **If you are using Home Assistant via HTTPS, you need to specify port `https` for Plex and have Plex available on https connection.** ## Installation - Install **Plex Meets Home Assistant** from HACS. - Reload browser, clear cache as usual - Create a new Home Assistant tab, turn on panel mode - Add a new card, see configuration below. ## Configuration **type**: 'custom:plex-meets-homeassistant' **token**: Enter your [Plex Token](https://support.plex.tv/articles/204059436-finding-an-authentication-token-x-plex-token/) **ip**: Enter ip address of plex server. You can also enter hostname without protocol or port. **libraryName**: Name of the library you wish to render. _Available special libraries:_ | Special Library | Description | | ----------------- | --------------------------------------------------------------------------------------------------------------------------- | | Watch Next | Shows Continue Watching feed just like in your new plex interface. **Does not work with old servers.** | | Recently Added | Shows recently added tv show episodes, might use old Plex API. For recently added movies use sort with your movies library. | | Continue Watching | Shows movies and tv shows in progress, uses old Plex API. | | Deck | Shows tv shows on deck, uses old Plex API. | **entity**: You need to configure at least one supported media_player entity. - **androidtv**: Entity id of your media_player configured via [Android TV](https://www.home-assistant.io/integrations/androidtv/). See [detailed instructions](https://github.com/JurajNyiri/PlexMeetsHomeAssistant#android-tv-or-fire-tv). - **kodi**: Entity id of your media_player configured via [Kodi](https://www.home-assistant.io/integrations/kodi/). See [detailed instructions](https://github.com/JurajNyiri/PlexMeetsHomeAssistant#kodi). - **plexPlayer**: Name or machine ID of your plex client. Use this if you do not have devices above. See [detailed instructions](https://github.com/JurajNyiri/PlexMeetsHomeAssistant#all-other-plex-clients). - **cast**: Entity id of your media_player configured via [Google Cast](https://www.home-assistant.io/integrations/cast/). See [detailed instructions](https://github.com/JurajNyiri/PlexMeetsHomeAssistant#google-cast). **port**: _Optional_ Port of your plex sever. **protocol**: _Optional_ Protocol to use for Plex. Defaults to "http". **maxCount**: _Optional_ Maximum number of items to display in card. **sort**: _Optional_ Define sort by. See [detailed instructions](https://github.com/JurajNyiri/PlexMeetsHomeAssistant#sorting) **runBefore**: _Optional_ Specify a script to run before playing. This can be for example a script which turns on your TV and waits 5 seconds. If this is specified and provided entity/script exists, all the other play checks for availability of entity are ignored. **runAfter**: _Optional_ Specify a script to run after playing. **showExtras**: _Optional_ Specify whether to show extras if any available on movie / episode. Possible values: true, false. Default: true **playTrailer**: _Optional_ Specify whether to play trailer if available. Possible values: true, false, muted. Default: true Example of card configuration: ``` type: 'custom:plex-meets-homeassistant' token: QWdsqEXAMPLETOKENqwerty ip: 192.168.13.37 port: 32400 libraryName: Movies protocol: http maxCount: 10 sort: title:desc entity: kodi: media_player.kodi_123456qwe789rty androidtv: media_player.living_room_nvidia_shield plexPlayer: 192.168.13.38 cast: media_player.bedroom_tv ``` Example using lists: ``` type: 'custom:plex-meets-homeassistant' token: QWdsqEXAMPLETOKENqwerty ip: 192.168.13.37 port: 32400 libraryName: Deck protocol: http maxCount: 10 sort: title:desc runBefore: script.turn_on_tv_and_wait runAfter: script.movie_time entity: kodi: - media_player.kodi_bedroom - media_player.kodi_living_room androidtv: - media_player.living_room_nvidia_shield - media_player.bedroom_nvidia_shield - media_player.kithen_nvidia_shield plexPlayer: - TV 2020 - 192.168.13.50 cast: - media_player.bedroom_tv ``` In this example, it will try to first play via kodi, in bedroom. If that kodi is unavailable or off, it tries in living room kodi. If that fails, it moves on to android tvs, starting with living room, continuing with bedroom and ending with kitchen. Next, if a possible player still has not been found (all kodis and shields are off) it tries to play via plexPlayer, trying TV 2020 and if not found, IP 192.168.13.50. Finally, it tries to cast into media_player.bedroom_tv. ## Detailed configuration instructions for end devices _You can combine multiple supported entities_, in that case, entity for supported content will be chosen in order how you entered them. As an example, if content can be played / shown both by kodi and androidtv, and you entered kodi first, it will be shown by kodi. If it cannot be played by kodi but can be played by androidtv, androidtv will be used. This will also work with play button being shown, it will only show when you can actually play content on your device. Play button is only visible if all the conditions inside Availability section of end devices below are met. ### Android TV or Fire TV **Difficulty to setup**: Easy **Steps**: - Install plex application on your Android TV device. Open it and do the default setup so that you can see and navigate your libraries. - Setup [Android TV](https://www.home-assistant.io/integrations/androidtv/). You need just a [default configuration](https://www.home-assistant.io/integrations/androidtv/#configuration), no optional parameters needed. - Use entity_id of media_player provided by Android TV integration in card, example: `androidtv: media_player.living_room_nvidia_shield`. **Availability**: - Provided entity ID needs to exists - Provided entity ID needs to have attributes - Provided entity ID needs to have attribute adb_response **Supported**: ✅ Shared Plex servers ✅ Movies ✅ Show ✅ Season ✅ Episodes ### Kodi **Difficulty to setup**: Moderate **Steps**: - Install and configure [PlexKodiConnect](https://github.com/croneter/PlexKodiConnect#download-and-installation) on Kodi itself. - Setup [Kodi](https://www.home-assistant.io/integrations/kodi/) integration for your device. - Install and configure integration [Kodi Recently Added Media](https://github.com/jtbgroup/kodi-media-sensors#installation) and its sensor **kodi_media_sensor_search**
Images of installation of Kodi Recently Added Media ![Click on add integration in integrations](https://github.com/JurajNyiri/PlexMeetsHomeAssistant/blob/main/images/kodi_setup/1.png) ![Find integration Kodi Media Sensors](https://github.com/JurajNyiri/PlexMeetsHomeAssistant/blob/main/images/kodi_setup/2.png) ![Configure integration Kodi Media Sensors](https://github.com/JurajNyiri/PlexMeetsHomeAssistant/blob/main/images/kodi_setup/3.png)
- Use entity_id of media_player provided by Kodi integration in card, example: `media_player.kodi_123456qwe789rty`. **Availability**: - Provided entity ID needs to exists - Entity 'sensor.kodi_media_sensor_search' needs to exist - State of both entities cannot be 'unavailable' - State of kodi cannot be 'off' **Supported**: ✅ Shared Plex servers _\*if content available in kodi_ ✅ Movies ❌ Show ❌ Season ✅ Episodes ### Google Cast **Difficulty to setup**: Very easy **Steps**: - Set up [Google Cast](https://www.home-assistant.io/integrations/cast/) in Home Assistant. - Use entity_id of media_player provided by Google Cast integration in card, example: `cast: media_player.bedroom_tv`. - Save card configuration and make sure the entity is not `unavailable`, if you see play buttons on movies or individual episodes configuration was successful. **Availability**: - Media player entity cannot be `unavailable` **Supported**: ✅ Shared Plex servers ✅ Movies ❌ Show ❌ Season ✅ Episodes ### All other plex clients **Difficulty to setup**: Very Easy to Moderate **Steps**: _Easy setup_: Notice: While easy, it might not work if you have multiple devices with the same name, or you buy a second device with the same name in the future. Some plex clients also incorrectly report theirs IP Address, so addition by that might not be working. Take a look at Machine ID setup below if this is a concern for you. - Open Plex app on the device you wish to add - Open your Plex web GUI - Click on cast on the top right corner and note down name of your device ![Plex cast](https://github.com/JurajNyiri/PlexMeetsHomeAssistant/blob/main/images/plex_player/1.png) - Add it to card, example: ``` entity: plexPlayer: TV 2020 ``` Instead of device name, you can also enter device IP address or product name. - Save card configuration, if you see play buttons everywhere configuration was successful. If you do not see play button, or have multiple devices with the same name, follow Machine ID setup below. _Machine ID setup_: - Open Plex app on the device you wish to add - Open your Plex web GUI - Modify URL so that just after the port, just after the first slash, you enter `clients?X-Plex-Token=PLEX_TOKEN`. Replace PLEX_TOKEN with your plex token. Example final URL `http://192.168.13.37:32400/clients?X-Plex-Token=qweRTY123456`. - You will get a list of all currently connected Plex clients. - Find the client you wish to add, and copy machineIdentifier key without quotes. - Add machineIdentifier into card, for example: ``` entity: plexPlayer: mYaweS0meMacHin3Id3ntiFI3r ``` - Save card configuration, if you see play buttons everywhere configuration was successful. **Availability**: - Plex needs to run on the defined device **Supported**: ✅ Shared Plex servers _\*requires additional configuration, see below_ ✅ Movies ✅ Show ✅ Season ✅ Episodes **Shared Plex servers configuration** plexPlayer can be configured in multiple ways, achieving the same thing: ``` entity: plexPlayer: TV 2020 ``` ``` entity: plexPlayer: - TV 2020 ``` ``` entity: plexPlayer: identifier: TV 2020 ``` ``` entity: plexPlayer: - identifier: TV 2020 ``` As can be seen from the last two examples, it is possible to configure it as an object having key "identifier". That is useful, if you want to stream media from shared or remote Plex server. Add information about your local Plex server which sees your device on which you wish to play content. This is done by including a new key, "server" having additional keys: Example 1: ``` entity: plexPlayer: - identifier: TV 2020 server: ip: 192.168.13.37 # Mandatory token: QWdsqEXAMPLETOKENqwerty # Mandatory port: 32400 protocol: http ``` Example 2: ``` entity: plexPlayer: identifier: TV 2020 server: ip: 192.168.13.37 # Mandatory token: QWdsqEXAMPLETOKENqwerty # Mandatory port: 32400 protocol: http ``` ## Sorting You can use _:desc_ or _:asc_ after every value to change the order from ascending to descending. For example, titlesort would become titleSort:asc, or titleSort:desc. ### TV Shows | Sort Value | Description | | --------------------- | ------------------------------------------------- | | titleSort | Sorts by title, removing words like "the" | | title | Sorts by title, without removing words like "the" | | year | Sorts by year | | originallyAvailableAt | Sorts by release date | | rating | Sorts by critic rating | | audienceRating | Sorts by audience rating | | userRating | Sorts by user rating | | contentRating | Sorts by content rating | | unviewedLeafCount | Sorts by unplayed count | | episode.addedAt | Sorts by last episode date added | | addedAt | Sorts by date added | | lastViewedAt | Sorts by date viewed | ### Movies | Sort Value | Description | | --------------------- | ------------------------------------------------- | | titleSort | Sorts by title, removing words like "the" | | title | Sorts by title, without removing words like "the" | | originallyAvailableAt | Sorts by release date | | rating | Sorts by critic rating | | audienceRating | Sorts by audience rating | | userRating | Sorts by user rating | | duration | Sorts by duration | | viewOffset | Sorts by progress | | viewCount | Sorts by plays | | addedAt | Sorts by date added | | lastViewedAt | Sorts by date viewed | | mediaHeight | Sorts by resolution | | mediaBitrate | Sorts by bitrate | ## Ask for help or help development Join [Discord](https://discord.gg/jqqz9jQXWx) or [Home Assistant Community](https://community.home-assistant.io/t/custom-component-card-plex-meets-home-assistant/304349). ## Images ![View without hover](https://github.com/JurajNyiri/PlexMeetsHomeAssistant/blob/main/images/design_preview/1.png) ![View with hover](https://github.com/JurajNyiri/PlexMeetsHomeAssistant/blob/main/images/design_preview/2.png) ![Expanded movie view](https://github.com/JurajNyiri/PlexMeetsHomeAssistant/blob/main/images/design_preview/3.png) # Want to buy me a beer? Buy Me A Coffee # Disclaimer Author is in no way affiliated with Kodi, Plex, Roku, Android TV, Google or any other companies mentioned above. Author does not guarantee functionality of this card and is not responsible for any damage. All product names, trademarks and registered trademarks in this repository, are property of their respective owners. This card provides user interface for navigating plex library and playing plex content on users devices. It does not host any content on its own and does not provide any plex server.