diff --git a/Dockerfile b/Dockerfile
index 0a03b3b..f06bbaf 100644
--- a/Dockerfile
+++ b/Dockerfile
@@ -52,5 +52,5 @@ RUN \
 COPY root/ /
 
 # ports and volumes
-EXPOSE 32400/tcp 3005/tcp 8324/tcp 32469/tcp 1900/udp 32410/udp 32412/udp 32413/udp 32414/udp
+EXPOSE 32400/tcp 1900/udp 3005/tcp 5353/udp 8324/tcp 32410/udp 32412/udp 32413/udp 32414/udp 32469/tcp
 VOLUME /config
diff --git a/Dockerfile.aarch64 b/Dockerfile.aarch64
index 58d2010..6590bad 100644
--- a/Dockerfile.aarch64
+++ b/Dockerfile.aarch64
@@ -49,5 +49,5 @@ RUN \
 COPY root/ /
 
 # ports and volumes
-EXPOSE 32400/tcp 3005/tcp 8324/tcp 32469/tcp 1900/udp 32410/udp 32412/udp 32413/udp 32414/udp
+EXPOSE 32400/tcp 1900/udp 3005/tcp 5353/udp 8324/tcp 32410/udp 32412/udp 32413/udp 32414/udp 32469/tcp
 VOLUME /config
diff --git a/Dockerfile.armhf b/Dockerfile.armhf
index 5bd94e5..471eb25 100644
--- a/Dockerfile.armhf
+++ b/Dockerfile.armhf
@@ -49,5 +49,5 @@ RUN \
 COPY root/ /
 
 # ports and volumes
-EXPOSE 32400/tcp 3005/tcp 8324/tcp 32469/tcp 1900/udp 32410/udp 32412/udp 32413/udp 32414/udp
+EXPOSE 32400/tcp 1900/udp 3005/tcp 5353/udp 8324/tcp 32410/udp 32412/udp 32413/udp 32414/udp 32469/tcp
 VOLUME /config
diff --git a/README.md b/README.md
index 717d442..5e70c94 100644
--- a/README.md
+++ b/README.md
@@ -133,15 +133,23 @@ Will set the environment variable `PASSWORD` based on the contents of the `/run/
 
 ## Optional Parameters
 
-*Special note* - If you'd like to run Plex without requiring `--net=host` (`NOT recommended`) then you will need the following ports in your `docker create` command (you need to set PLEX_CLAIM to claim a server set up with bridge networking):
+If you want to run the container in bridge network mode (instead of the recommended host network mode) you will need to specify ports.
+The [official documentation for ports](https://support.plex.tv/articles/201543147-what-network-ports-do-i-need-to-allow-through-my-firewall/) lists 32400 as the only required port.
+The rest of the ports are optionally used for specific purposes listed in the documentation.
+If you have not already claimed your server (first time setup) you need to set `PLEX_CLAIM` to claim a server set up with bridge networking.
 
 ```
   -p 32400:32400 \
-  -p 32400:32400/udp \
-  -p 32469:32469 \
-  -p 32469:32469/udp \
+  -p 1900:1900/udp \
+  -p 3005:3005 \
   -p 5353:5353/udp \
-  -p 1900:1900/udp
+  -p 8324:8324 \
+  -p 32410:32410/udp \
+  -p 32412:32412/udp \
+  -p 32413:32413/udp \
+  -p 32414:32414/udp \
+  -p 32469:32469
+
 ```
 
 The application accepts a series of environment variables to further customize itself on boot:
@@ -273,6 +281,7 @@ Once registered you can define the dockerfile to use with `-f Dockerfile.aarch64
 
 ## Versions
 
+* **03.05.20:** - Update exposed ports and example docs for bridge mode.
 * **23.03.20:** - Remove udev hack (no longer needed), suppress uuid error in log during first start.
 * **04.12.19:** - Add variable for setting PLEX_CLAIM. Remove `/transcode` volume mapping as it is now set via plex gui and defaults to a location under `/config`.
 * **06.08.19:** - Add variable for setting UMASK.
diff --git a/readme-vars.yml b/readme-vars.yml
index 5868762..f4f31bc 100644
--- a/readme-vars.yml
+++ b/readme-vars.yml
@@ -36,15 +36,23 @@ opt_param_env_vars:
   - { env_var: "PLEX_CLAIM", env_value: "", desc: "Optionally you can obtain a claim token from https://plex.tv/claim and input here. Keep in mind that the claim tokens expire within 4 minutes."}
 
 optional_parameters: |
-  *Special note* - If you'd like to run Plex without requiring `--net=host` (`NOT recommended`) then you will need the following ports in your `docker create` command (you need to set PLEX_CLAIM to claim a server set up with bridge networking):
+  If you want to run the container in bridge network mode (instead of the recommended host network mode) you will need to specify ports.
+  The [official documentation for ports](https://support.plex.tv/articles/201543147-what-network-ports-do-i-need-to-allow-through-my-firewall/) lists 32400 as the only required port.
+  The rest of the ports are optionally used for specific purposes listed in the documentation.
+  If you have not already claimed your server (first time setup) you need to set `PLEX_CLAIM` to claim a server set up with bridge networking.
 
   ```
     -p 32400:32400 \
-    -p 32400:32400/udp \
-    -p 32469:32469 \
-    -p 32469:32469/udp \
+    -p 1900:1900/udp \
+    -p 3005:3005 \
     -p 5353:5353/udp \
-    -p 1900:1900/udp
+    -p 8324:8324 \
+    -p 32410:32410/udp \
+    -p 32412:32412/udp \
+    -p 32413:32413/udp \
+    -p 32414:32414/udp \
+    -p 32469:32469
+
   ```
 
   The application accepts a series of environment variables to further customize itself on boot:
@@ -92,6 +100,7 @@ app_setup_block: |
 
 # changelog
 changelogs:
+  - { date: "03.05.20:", desc: "Update exposed ports and example docs for bridge mode." }
   - { date: "23.03.20:", desc: "Remove udev hack (no longer needed), suppress uuid error in log during first start." }
   - { date: "04.12.19:", desc: "Add variable for setting PLEX_CLAIM. Remove `/transcode` volume mapping as it is now set via plex gui and defaults to a location under `/config`." }
   - { date: "06.08.19:", desc: "Add variable for setting UMASK." }